Standards and compliance
A project-based reference to structural, operational, machinery-safety, fire-protection and inspection standards used when specifying warehouse racking, shelving, mezzanine and automated storage systems.
Product compliance
RUNDA RACK products are designed, manufactured, supplied and installed in accordance with applicable international standards, project specifications and destination-market requirements.
Application-specific engineering
Product type, destination, load data, building conditions, seismic requirements, fire strategy, handling equipment and automation interfaces determine the detailed engineering, documentation and compliance scope for each supplied system.
Reference register
Last reviewed: 17 July 2026
These standards support consistent quality, environmental and occupational health and safety management across manufacturing, supply, integration and installation activities.
ISO 9001
2015 + Amd 1:2024
ISO 9001 supports organization quality-management systems. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include organization-level quality-management requirements. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 14001
2026
ISO 14001 supports organization environmental-management systems. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include organization-level environmental-management requirements. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 45001
2018 + Amd 1:2024
ISO 45001 supports organization occupational-health-and-safety systems. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include does not replace project machinery or site safety assessment. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
The EN storage-equipment series separates structural design, tolerances, specification, use, maintenance and seismic conditions. The correct combination depends on the rack family and project.
EN 15512
2020 + A1:2022
EN 15512 supports adjustable beam pallet racking, ancillary rack structures and relevant clad-rack design. It is applied across Europe and specified international projects according to the product family, destination and project scope. Key scope considerations include mobile, drive-in, drive-through, pallet-live, push-back, shuttle, cantilever and static shelving systems. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
EN 15620
2021
EN 15620 supports specified pallet racking, drive-in, drive-through and cantilever interfaces. It is applied across Europe and specified international projects according to the product family, destination and project scope. Key scope considerations include automated trucks, mini-load and satellite systems need additional interface rules. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
EN 15629
2008
EN 15629 supports technical specification and responsibility coordination for steel racking and shelving. It is applied across Europe and specified international projects according to the product family, destination and project scope. Key scope considerations include non-steel and domestic storage equipment. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
EN 15635
2008
EN 15635 supports use, inspection and maintenance of steel static storage equipment. It is applied across Europe and specified international projects according to the product family, destination and project scope. Key scope considerations include does not provide the structural design method for every rack family. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
EN 16681
2016
EN 16681 supports adjustable pallet racking subject to seismic actions. It is applied across Europe and seismic projects using the framework according to the product family, destination and project scope. Key scope considerations include mobile, drive-in, drive-through, cantilever, shelving and seismic-isolated racks. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
EN 1090-1
2009 + A1:2011
EN 1090-1 supports structural components where the market and construction-product scope apply. It is applied across Europe and specified structural projects according to the product family, destination and project scope. Key scope considerations include does not automatically apply to every shelf or rack product. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM guidance addresses systems that are not fully covered by one adjustable-pallet-rack standard, including drive-in, cantilever, mobile, shuttle, shelving and industrial platform applications.
FEM 10.2.06
Parts 1 and 2
FEM 10.2.06 supports low-rise and other hand-loaded steel shelving within the applicable part. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include pallet racks and machinery-driven systems. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM 10.2.07
Current listed edition
FEM 10.2.07 supports drive-in and drive-through pallet racking. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include adjustable selective and cantilever rack design. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM 10.2.09
Current listed edition
FEM 10.2.09 supports steel cantilever storage racks. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include adjustable pallet racks and general shelving. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM 10.2.16
Current listed edition
FEM 10.2.16 supports rack-protection selection and use. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include does not replace rack structural design. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM 10.2.18
Current listed edition
FEM 10.2.18 supports racking installed on mobile bases. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include fixed-base rack design alone. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM 10.2.19
Current listed edition
FEM 10.2.19 supports pallet shuttle racking. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include conventional adjustable pallet rack design alone. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FEM 10.2.21
2026
FEM 10.2.21 supports indoor industrial and storage platforms within its scope. It is applied across International projects adopting FEM guidance according to the product family, destination and project scope. Key scope considerations include does not replace local building, fire, stair, egress or authority requirements. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
Regional specifications are selected when required by the destination, buyer, engineer, authority or project contract. Each standard has explicit product limits.
ANSI MH16.1
2023
ANSI MH16.1 supports industrial steel racks, rack-supported systems and listed AS/RS rack structures. It is applied across United States and specified international projects according to the product family, destination and project scope. Key scope considerations include drive-in, drive-through, cantilever, portable and non-steel racks. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ANSI MH16.3
2025
ANSI MH16.3 supports free-standing and top-tied steel cantilever racks. It is applied across United States and specified international projects according to the product family, destination and project scope. Key scope considerations include adjustable pallet racks and non-steel cantilever structures. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ANSI MH26.2
2023
ANSI MH26.2 supports storage rack decking used with qualifying industrial racks. It is applied across United States and specified international projects according to the product family, destination and project scope. Key scope considerations include walking surfaces and decking outside its scope. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ANSI MH32.1
2018
ANSI MH32.1 supports fixed access and guards for listed industrial platforms and pick modules. It is applied across United States and specified international projects according to the product family, destination and project scope. Key scope considerations include building roof access, conveyor crossovers and access attached to automated equipment. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
R-Mark
Current programme
R-Mark supports manufacturers, systems and installations covered by the RMI programme. It is applied across United States and programme-recognising buyers according to the product family, destination and project scope. Key scope considerations include programme-specific manufacturer and system requirements. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
AS 4084.1
2023
AS 4084.1 supports adjustable static pallet racking within the stated scope. It is applied across Australia and specified projects according to the product family, destination and project scope. Key scope considerations include drive-in, drive-through, cantilever, mobile and listed low-rise hand-loaded shelving. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
AS 4084.2
2023 + Amd 1:2024
AS 4084.2 supports installation, operation, inspection and maintenance within the stated scope. It is applied across Australia and specified projects according to the product family, destination and project scope. Key scope considerations include drive-in, cantilever, mobile and listed low-rise hand-loaded shelving. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
Automation projects combine machine risk assessment, guarding, emergency stop, electrical equipment, functional safety, storage-machine interfaces and market-specific machinery law.
EN 528
2021
EN 528 supports rail-dependent storage and retrieval machines and applicable transfer equipment. It is applied across Europe and specified automation projects according to the product family, destination and project scope. Key scope considerations include interfaces outside the machine scope still need separate review. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 12100
2010
ISO 12100 supports machinery lifecycle hazard identification, risk estimation and reduction. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include does not supply a product-specific safety solution by itself. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 13849-1
2023
ISO 13849-1 supports safety-related control-system design and integration. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include does not define every required safety function or performance level. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
IEC 60204-1
2016 + A1:2021
IEC 60204-1 supports electrical, electronic and programmable equipment of applicable machines. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include starts at the machine electrical-supply connection and does not replace every product-specific standard. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 13850
2015
ISO 13850 supports machinery emergency-stop function design. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include machines where emergency stop does not reduce risk and hand-held machines. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 14119
2024
ISO 14119 supports guard-interlocking device design and selection. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include guard construction and downstream safety-control processing need their own standards. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 14120
2015
ISO 14120 supports fixed and movable guards against mechanical hazards. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include interlocking devices are covered separately. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
IEC 62061
2021 + A1:2024 + A2:2026
IEC 62061 supports design, integration and validation of machinery safety-related control systems. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include does not replace electrical-hazard or physical-guarding requirements. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
Directive 2006/42/EC
Applicable before 2027-01-20
Directive 2006/42/EC supports relevant machinery placed on the EU market before the replacement date. It is applied across European Union according to the product family, destination and project scope. Key scope considerations include legal machinery scope and published transition dates. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
Regulation (EU) 2023/1230
Mandatory from 2027-01-20
Regulation (EU) 2023/1230 supports relevant machinery placed on the EU market from its application date. It is applied across European Union according to the product family, destination and project scope. Key scope considerations include not a universal product approval. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
Commodity, container, pallet, rack geometry, automation and sprinkler conditions must be reviewed together with the fire consultant, insurer and authority responsible for the project.
NFPA 13
2025
NFPA 13 supports sprinkler protection, including relevant rack-storage arrangements. It is applied across United States and projects specifying NFPA according to the product family, destination and project scope. Key scope considerations include does not replace local fire authority, insurer or commodity review. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FM Data Sheet 8-9
2026 revision
FM Data Sheet 8-9 supports specified warehouse commodities and storage arrangements. It is applied across Projects using FM guidance according to the product family, destination and project scope. Key scope considerations include requires the actual commodity, container, rack and sprinkler conditions. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
FM Data Sheet 8-34
2026 interim revision
FM Data Sheet 8-34 supports applicable horizontal-loading, top-loading and vertically enclosed AS/RS arrangements. It is applied across Projects using FM guidance according to the product family, destination and project scope. Key scope considerations include requires system-specific commodity and protection review. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 8611
Current series
ISO 8611 supports flat pallet evaluation and working-load interfaces. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include pallet testing and load-carrier interface scope. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
ISO 6780
2003
ISO 6780 supports principal dimensions and tolerances of flat pallets. It is applied across Worldwide according to the product family, destination and project scope. Key scope considerations include does not determine rack capacity. RUNDA RACK incorporates the applicable edition and project requirements into product selection, engineering and delivery documentation.
Project process
Confirm the pallet, container, product, load range, throughput, access and handling method.
Review the project country, authority, building, seismic, fire, insurer and customer specifications.
Match the rack, shelving, platform or automation architecture to standards that include that system within their scope.
Define calculations, drawings, interfaces, installation, inspection, commissioning, training and handover documents in the quotation.
Confirmed company scope
RUNDA RACK SDN. BHD. is a manufacturer, supplier, system integrator and installer of warehouse racking, storage systems, retail shelving, mezzanine solutions and selected automated storage systems, with its own factory and installation team supporting projects worldwide.
Product and project compliance
RUNDA RACK products are designed, manufactured, supplied and installed in accordance with applicable international standards, project specifications and destination-market requirements.
Product selection, calculations, drawings, manufacturing, installation, commissioning and handover documentation are coordinated around the relevant product family and destination requirements.
Available for review
Project references, customer feedback, site photographs and available technical documents can be requested through WhatsApp for procurement review, subject to customer confidentiality and publication permissions.
Final authority
This page is a procurement and planning reference. The final design must follow the contract, applicable law, appointed engineers, fire consultant, insurer, equipment suppliers and authorities responsible for the project.
